Abrasive Wheel Dresser


K.O. LEE Abrasive Wheel Dressers fill the gap between the diamond dresser and the conventional “star” type dresser, performing as well as a diamond dresser, but with much less cost. Your grinding wheel can be dressed in just a few seconds, with the use of this outstanding tool. For fast dressing, we suggest the operator tilt their dresser at an angle of approximately 15° to the wheel and use only light pressure against the wheel being dressed.

E1 Dresser
1-1/2″ x 6″ (38.1mm x 152.4mm) for wheels with diameters up to 6″ (152.4mm)/ Weight 3/4 lb. (0.3kg)

E2 Dresser
1-1/2″ x 12″ (63.5mm x 304.8mm) for wheels with diameters up to 10″ (254mm). Weight 2 lbs. (0.9kg)

E3 Dresser
3″ x 13″ (76.2mm x 330.2mm) for wheels with diameters of 8″ to 10″ (203.2 to 254mm). Weight 3-1/2 lbs. (1.6kg)

Abrasive Wheel Dressers Part List

Replacement Wheel

Wheel Dresser PDF

Get "How to Level a Lathe" Video

Enter your info below to get this special content delivered straight to your inbox!

(NOTE: If you don't see the e-mail within 5 mins, check your spam folder.)

* indicates required

You did it! Check your inbox shortly, and enjoy.