3976 Bach Buxton Road, Amelia,
OH 45102
| Phone: (888) 532-5663

RKL 3300 – RKL 3900 SERIES 40″




The headstock spindle is machined from forged alloy steel.  It is hardened, ground and dynamically balanced.  The spindle has three (3) point high grade precision bearings support.


Wide selection of fix speeds coupled with a powerful 15hp motor to conquer your turning needs.  The lathe comes standard with 16 speed selections providing high torque up all the way to 800 RPM. The electronic control panel is conveniently mounted with ON-OFF power indicator light, emergency stop push button, coolant pump switch and spindle jogging push button.  Pumping system designed to provide constant lubrication to spindle bearings no matter the turning speed.


One-piece machine floor base is made of solid cast iron. Wide bed design is made of Meehanite casting that is vibration stress relieved.  Bed ways are induction hardened to HRC 53 and precision ground.  The precision hand scraped bed is designed with a removable gap. The industry proven LeBlond traditional design Vee and Wide Flat solid bed structure provides rigidity that assures accuracy and maximum stability.

  • Spindle Drive Motor 15HP
  • Lockable Main Disconnect Switch
  • Coolant System with Pump
  • Chuck Guard (Manual) w/Safety Interlock
  • Removable Chip Pans
  • Full Length Splash Guard to 200″
  • Mobile Splash Guard 240″ and Larger
  • Safety Red Spindle Brake Pedals
  • Halogen Work Light
  • Leveling Pads
  • Multi-start Thread Indexing
  • 4-Way Quick Turn Tool Post
  • Pressurized Headstock Lube System
  • Rapid Carriage Traverse
  • Dead Center
  • Steady Rest w/Roller Jaws 15″ — 22″
  • Follow Rest w/Roller Jaws 3″ —11.8″
  • Taper Turning Attachment
  • 20″ Face Plate
  • Operation Manual & Parts List
  • Tool Box & Tools
  • Multi-position Bed Stop

Coming Soon …

Swing Over Bed40″Inch Threads(40) 2 to 28 TPI (16) .625″ – 8″
Distance Between Centers80″ 120″ 160″ 199″ 238″ 278″Metric Threads(92) 1 to 200 MM
Swing Over Cross-Slide30″Lead Screw1.89″
Swing in Gap52.4″2 TPI
Spindle Nose to Gap (Max)15″Feed Selections90
Cross Slide Travel21.3″Longitudinal0.00048″ to 0.2694″ IPR 0.012 —7.12 mm
Compound/Top Slide Travel8.7″Cross FeedHalf of Longitudinal
Bed Width22″Quill Diameter4″
Spindle NoseD1-11Quill Travel11.0″
Spindle Bore4.1″Quill Inside TaperMT 6
Taper Inside Spindle/SleeveMT 7/ MT 5Spindle Motor15 HP
Spindle Speed (RPM): Low8__ 70Voltage480V/60hz/3PH*
Spindle Speed (RPM): Med__Coolant Motor1/4 HP
Spindle Speed (RPM): High90-800Lube Motor1/4 HP

*other voltages available

Coming Soon …

PHONE: (888) 532-5663  Parts: Press 1  Machine Sales: Press 2   Service: Press 3
FAX: Parts and Machine Sales: (513) 943-0101/Service: (888) 532-5663

For New Sales, Parts, & Services

CALL (888) 532-5663 Parts: Press 1 New Machines: Press 2 Service: Press 3 FAX Parts: (513) 943-0101 Service: (888) 532-5663 LeBlond Ltd. 3976 Bach Buxton Road Amelia, OH 45102

Get "How to Level a Lathe" Video

Enter your info below to get this special content delivered straight to your inbox!

(NOTE: If you don't see the e-mail within 5 mins, check your spam folder.)

* indicates required

You did it! Check your inbox shortly, and enjoy.