RKL2100G – RKL2500G – RKL2900G LATHES

SERIES GEARED HEAD

HEAVY DUTY PRECISION LATHE

  • 22″ – 26″ – 30″ SWING
  • 57″ TO 157″ BETWEEN  CENTERS
  • 12 TURNING SPEED SELECTIONS
  • 15 HP
  • INCH AND METRIC THREADING
  • CUSTOMIZED OPTION CONTENT

LeBlond RKL-25120G Heavy Duty Geared Head Lathe

ADD THIS LATHE TO YOUR CUSTOM QUOTE

1) Select your options.     2) Click “Add to Quote”!

RKL2100G

RKL2500G

RKL2900G

Reliability and performance with a legendary name in machine tools! Try the LeBlond RKL Heavy Duty Series lathe with a 22″, 26″ or 30″ swing in diameter and 57″ up to 157″ distance between centers.

LATHE FEATURES

HEAVY DUTY SPINDLE:

The headstock spindle is machined from forged alloy steel. It is hardened, ground and dynamically balanced.  Large through hole with convenient D1-11 cam-lock mount.  Special attention was given to lubrication channels providing a constant bath of oil to the three supporting high grade precision tapered roller bearings for long life.

12 SPEED HEADSTOCK:

Wide selection of fixed speeds coupled with a powerful 15hp motor to conquer your turning needs.  The lathe comes standard with 12 speed selections providing high torque up all the way to 1200 RPM. An electronic control panel is conveniently mounted with ON-OFF power indicator light, emergency stop push button, coolant pump switch and spindle jogging push button.  Lubrication channels are designed to provide constant headstock gear and bearing lubrication.

Wide BED with one piece BASE:

One-piece machine floor base is made of solid cast iron. Wide bed design is made of Meehanite casting that is vibration stress relieved. Bed ways are induction hardened to HRC 50 and precision ground. Precision hand scraped bed is designed with a removable gap further expanding swing capabilities. The proven LeBlond 2V and wide flat solid bed structure provides rigidity that assures accuracy and maximum stability.  Standard large volume removable chip tray makes for easy chip clean out and disposal.

  • Main Drive Motor: 15 hp
  • Electrics: 480V/3PH/60HZ (other voltages available)
  • Coolant System with Pump
  • Chuck Guard with Operator Safety Interlock
  • Removable Front Chip Pan
  • Lockable Main Disconnect Switch
  • Lockable Electrical Cabinet
  • Adjustable Apron Infeed Overload Safety Clutch
  • LED Work Light
  • Leveling Pads
  • Operation Manual & Parts List
  • Tool Box & Tools Including Touch-Up Paint
  • Steady Rest w/ Roller Jaws, 1.6″~10.0″ (40~255mm) Capacity
  • Follow Rest w/ Bronze Jaws, 1.2″~6.3″ (30~160mm) Capacity
  • Spindle Back Plate
  • Thread Indicator
  • Telescopic Taper Attachment
  • 4-Way Quick Turn Tool Post
  • 12″ Backplate
  • Safety Red Spindle Brake Pedal
  • Full Length Splash Guard
  • Dead Center
  • Spindle Center Sleeve: MT 7 X MT 5

Picture1

 –  RKL2100G – RKL2500G – RKL2900G  
LATHE CAPACITY Swing Over Bed 22″ – 26″ – 30″
Distance Between Centers 57″- 87″ – 117″ – 157″
Swing Over Carriage 13.4″ – 17.5″ – 21.6″
Swing in Gap 31.4″ – 35.1″  39.0″
Cross Slide Travel 15.75″
Top Slide Travel 9.5″
Bed Width 15.75″
   
   
  –    
HEADSTOCK Spindle Nose D1-11
Spindle Bore 4.09″
Spindle Taper MT 7
12 Speed Selections (RPM): 13 – 1200
  –    
THREADS Inch Threads (44) 2 to 72 TPI
Metric Threads (39) 0.2 to 14 MM
Modular Threads (18) 0.3 to 3.5
Diametral Threads (21) 8 to 44
Lead Screw Diameter 1.75″
Lead Screw Pitch 4 TPI
   
FEEDS Longitudinal Feed 0.0012 to 0.039 IPR
Cross Feed 0.0004 to 0.0117 IPR
Feed Selections 16 / 16
   
TAILSTOCK Quill Diameter 3.1″
Quill Travel 9.8″
Quill Inside Taper MT 5
   
ELECTRICS Spindle Motor HP 15 HP
Voltage 480V / 3PH/ 60Hz*
Coolant Motor 1/8 HP
   
   

PHONE: +1 (888) 532-5663  Parts: Press 1  Machine Sales: Press 2   Service: Press 3
FAX: Parts and Machine Sales: (513) 943-0101/Service: (888) 532-5663