LVM 0900 SERIES

VERTICAL KNEE MILL

  • 9″ x 42″ or 9″ x 48″ TABLE
  • ELECTRONIC VARIABLE SPEED, MECHANICAL SPEED OR 16-SPEED STEP PULLEY
  • AUTOMATIC POWER DRAW BAR AVAILABLE
  • POWER FEED CAPABILITY AVAILABLE
  • DIGITAL METER
  • 3 PHASE or SINGLE PHASE
  • CUSTOMIZED OPTION CONTENT
lvm0900 series vertical knee mill

VERTICAL KNEE MILL FEATURES

Reliable

Economical and easy to operate with reliability and performance that come from a legendary name in machine tools! The LeBlond LVM 0900 Series Vertical Knee Mill features a 9″ x 42″ or 9″ x 48″ table and multiple spindle speed control selections.

Precision

Spindle support provided by high-precision Class 7 (p4) angular contact ball bearings that have been accurately measured, selected and pre-loaded, then assembled in a temperature-controlled room to ensure accuracy and rigidity throughout the full RPM range.

Heavy Duty

All essential castings are made of high-grade Meehanite cast iron that has been stress-relieved to provide a rigid machine structure. The quill-feed mechanism utilizes a one-piece pinion gear and shaft that both provide strength, rigidity and less maintenance.

Quiet Operation

The low vibration infinitely variable high horsepower drive system creates the quietest head you ever used with dynamically balanced pulleys and chrome-plated motor shaft for smooth speed changes free of noise and vibration. An easy-to-read digital readout mounted to an adjustable operator station pendant is available.

  • Main Drive Motor & Inverter: 3.0 HP
  • Electrics: 230V/3PH/60HZ (other selections available)
  • Built in Coolant Tank in Base
  • Ground and Hardened Column Slide Ways
  • Three Precision Table T-Slots
  • Ram Slide Way Ground
  • High-Precision Class 7 Angular Contact Ball Bearing
  • Precision Hardened Quill, Ground & Chrome Plated
  • Cast Iron Hardened & Ground Table with Turcite B Coated Ways
  • Precision Scrapping for Ways & Saddle (Guaranteed Contact w/ Surface Greater than 60%)[/one_half]

  • Meehanite Single Wall Castings
  • Multi-Point Saddle, Knee, Table & Ram Locks for High Rigidity
  • Auto Lubrication System
  • Turcite-Coated Dovetail Ways
  • Chip Tray
  • Autolube
  • Digital Meter
  • Table Guard with Safety Interlock
  • Halogen Work Lamp

Working Surface

9" x 42"

T-slot

Quantity

3

Size

.63"

Table Travel X-Axis

Manual

23.5"

w/Optional Powerfeed

25.8"

Cross Travel Y-Axis

12"

Ram Travel

13"

Quill Travel

5"

Knee travel Z-Axis

16"

Spindle Center to Column (min-max)

2.75" – 18.75"

Spindle Nose to Table

1.63" – 18.5"

Motor

2 HP

Wiring voltage

230V/50HZ/3-PH

Taper

R-8

Speeds mechanically variable High/Low range

80-5,520 RPM

Quill feed (IPR)

0.0015", 0.003", 0.006"

Head swivel

360º

Head tilt; right-to-left (each way)

45º

Head tilt up-and-down (each way)

45º

W x L x H

58" X 63" X 86"

Footprint (W x D)

24" X 36"

Net weight

2,050 lbs

PHONE: +1 (888) 532-5663  Parts: Press 1  Machine Sales: Press 2   Service: Press 3
FAX: Parts and Machine Sales: (513) 943-0101/Service: (888) 532-5663