Your old lathe is bleeding money. Every second you spend squinting at grimy Vernier dials is profit walking out the door.

The Newall NMS 800 Digital Readout changes everything. No more guessing. No more mistakes.

Your Current Setup is Killing Productivity

Cross-slides have backlash. Tool pressure shifts everything back against the screw, throwing off your measurements when it matters most.

Vernier dials are a nightmare. Counting hand-wheel revolutions while oil and debris make everything harder to read is no way to run a shop.

You’re stopping constantly to check parts with scales, calipers and micrometers. That’s dead time that costs real money.

Internal diameter work is even worse. Setting up indicators and magnetic base holders eats up time, and there’s always the risk of something getting bumped or moved.

The NMS 800 Solves Everything

Newall’s latest DRO delivers precision within five microns. The NMS 800 uses linear scales mounted directly to your cross-slide and carriage axes, eliminating all the traditional headaches.

No more counting revolutions. No more compensating for lead screw backlash.

The crisp PMVA LCD display gives you clean, accurate readings with a wide viewing angle. Self-sensing encoder input means the system automatically detects what you’re using.

Available in 2, 3, or 4 axes configurations. User-definable function keys put your most-used features at your fingertips.

Built for the Real World

Newall’s Spherosyn Serial and Microsyn Serial encoders carry an IP67 rating. All electronic and measuring components are completely sealed from the environment.

No glass to break. No tape to scratch. No mechanical wear characteristics that require constant maintenance.

These encoders withstand dust, dirt, oil and whatever else your shop throws at them. They’re tolerant to shock and vibration because they use solid-state electronics instead of fragile mechanical systems.

Installation is simple. No backer bar required. No machined surface needed.

Limited Time: 25% Off Newall NMS 800

Right now, you can get 25% off a Newall DRO for both new and used LeBlond lathes and mills. 

This sale won’t last forever. Smart shop owners are already placing orders.

NMS 800 Features That Actually Matter

The system includes lathe, mill and general purpose functions. Absolute and incremental operation with axis pre-set and zero reset capabilities.

Built-in calculator for on-the-fly calculations. Undo function lets you step back up to eight operations if needed.

USB port for firmware updates and settings backup. Sleep mode conserves power during downtime.

For lathe work specifically, you get radius and diameter readings, a 50-tool offset library and taper calculation functions. Vectoring is available with 3-axis configurations.

The encoder compatibility covers Newall’s Spherosyn and Microsyn Serial systems, plus many third-party TTL encoders, including rotary types.

Stop Losing Money on Outdated Methods

Every day you delay is money left on the table. Your competitors using digital readouts are finishing jobs faster and with better accuracy.

The NMS 800 reduces positioning times dramatically. Accuracy and repeatability eliminate most stop-check-measure cycles except for final cuts.

Direct diameter reading cuts calculation time and reduces scrap. You’ll see productivity improvements of 20-40% immediately.

Five-Year Warranty Included

Newall backs the NMS 800 with a five-year, three-year no-fault warranty. That’s confidence in a product built to last.

The company has over 50 years of proven reliability in manufacturing DRO systems and linear encoders. 

Contact LeBlond For Newall DRO Sale

The 25% off Newall NMS 800 sale is for a limited time only. Once it’s gone, you’ll pay full price for the same productivity gains.

Your shop rate matters. Your time matters. Your accuracy matters.

The NMS 800 delivers on all three.

Contact LeBlond to save on a Newall NMS 800 Digital Readout:

• Fill out an online form by clicking HERE.
• Or call us at (888) 532-5663 and select Option 2.
• Or just leave a comment below, and we’ll be happy to help.

We look forward to hearing from you!