RKL1900V SERIES VARIABLE SPEED LATHE WITH ELECTRONIC CONTROL

HIGH SPEED PRECISION ELECTRONIC VARIABLE SPEED LATHE

  • 20″ SWING
  • 40″ OR 60″ BETWEEN  CENTERS
  • THREE INFINITE SPEED RANGES
  • 7.5 HP
  • 3 PHASE or SINGLE PHASE
  • CUSTOMIZED OPTION CONTENT

LeBlond RKL-1960V Electronic Variable Speed Lathe

ADD THIS LATHE TO YOUR CUSTOM QUOTE

1) Select your lathe options.     2) Click “Add to Quote”!

Press Release: PRWeb News Release

Reliability and performance with a legendary name in machine tools! Try the LeBlond RKL1900V series lathe with a 20″ swing in diameter and 40″ or 60″ distance between centers.

FEATURES

HEAVY DUTY SPINDLE:

The headstock spindle is machined from forged alloy steel. It is hardened, ground and dynamically balanced. Large through hole with convenient D1-6 cam-lock mount. Special attention was given to lubrication channels providing a constant bath of oil to the supporting high grade two precision tapered roller and one precision ball bearing for long life.

VARIABLE SPEED SPINDLE WITH ELECTRONIC CONTROL:

Three headstock gear ranges that supply a high torque in low range (30 to 125 RPM), mid-range (125 to 450 RPM) and is high range (450 to 2200RPM). The electronic control panel is mounted above the headstock provides a RPM LED display, ON-OFF power indicator light, speed control knob, emergency stop push button and spindle jogging push button. The electronic infinitely variable speed is controlled by an AC inverter duty motor. A 1/4HP electric pump provides the headstock with forced pressure lubrication.

Wide BED with one piece BASE:

One-piece machine floor base is made of solid cast iron. Wide bed design is made of Meehanite casting that is vibration stress relieved. Bed ways are induction hardened to HRC 50 and precision ground. Precision hand scraped bed is designed with a removable gap further expanding swing capabilities. The proven LeBlond 2V and flat solid bed structure provides rigidity that assures accuracy and maximum stability. Standard large volume removable chip tray makes for easy chip clean out and disposal.

  • Main Drive Motor: 7.5 hp
  • Electrics: 480V/3PH/60HZ (other voltages available)
  • Coolant System with Electric Pump
  • Chuck Guard (Manual) w/ Safety Interlock
  • Full Length Splash Guard
  • Removable Chip Tray
  • Lockable Main Disconnect Switch
  • LED Work Light
  • Leveling Pads (Qty. 6)
  • Operation Manual & Parts List
  • Tool Box & Tools Including Touch-Up Paint
  • Steady Rest with Roller Jaws, 0.4″~5.5″ (10~140mm) Capacity
  • Follow Rest with Roller Jaws, 0.6″~3.3″ (16~85mm) Capacity
  • Telescopic Taper Attachment
  • 4-Way Quick Turn Tool Post
  • Adjustable Apron Infeed Overload Safety Clutch
  • Thread Indicator
  • Face Plate, 12″
  • Safety Red Spindle Brake Pedal
  • Full Length Splash Guard
  • Dead Center (Qty 2)
  • Spindle Center Sleeve (Qty 1)

Picture1

RKL-1900V HIGH SPEED ELECTRONIC VARIABLE SPEED LATHE
CAPACITY Swing Over Bed 20″
Distance Between Centers 40″ / 60″
Swing Over Cross Slide 13.89″
Swing in Gap 27.48
Cross Slide Travel 10.7″
Top Slide Travel 6.3″
Carriage Width 18.77″
Carriage Length 17.32″
Bed Width 12″
 
HEADSTOCK Spindle Nose D1-6
Spindle Bore 3.149″
Spindle Taper MT 6

RPM: Infinitely Variable Low Range 30-125
Medium Range 125-450
High Range 450-2200

 
THREADS Inch Threads (45) 2 to 72 TPI
Metric Threads (39) 0.2 to 14 MM
Modular Threads (18) 0.3 to 3.5
Diametral Threads (21) 8 to 44
Lead Screw Diameter 1.25″
Lead Screw Pitch 4 TPI
 
FEEDS Longitudinal Feed 0.0015 to 0.04 IPR
Cross Feed 0.00075 to 0.02 IPR
 
TAILSTOCK Quill Diameter 2.322″
Quill Travel 5.0″
Quill Inside Taper MT 4
 
ELECTRICS Spindle Motor HP 7.5 HP
Voltage 480V / 3PH/ 60Hz*
Coolant Motor 1/8 HP
WEIGHT Approximate Weight (lbs) 3858 / 4188
Approximate Shipping Weight (lbs.) 4167 / 4542
 
SHIPPING SKID Width x Height 45.5″ x 75″
Length 95″ / 115″


PHONE: +1 (888) 532-5663 Parts: Press 1 Machine Sales: Press 2 Service: Press 3
FAX: Parts and Machine Sales: (513) 943-0101/Service: (888) 532-5663