LeBlond RKL-1560V Lathe

LeBLOND 15″X60″ EVS Lathe Model: RKL-1560V

Press Release
PRWeb News Release

Get a new, manual lathe from an old master! Try the LeBlond RKL-1560V lathe with a 15″ swing in diameter and 60″ distance between centers.

LeBlond RKL 1560 Front Shot

FEATURES

HEAVY DUTY SPINDLE:

The headstock spindle is machined from forged
alloy steel. It is hardened, ground and dynamically balanced. The spindle has three (3) point high grade precision bearings support.

ELECTRONIC VARIABLE SPEED HEADSTOCK:

There are two (2) headstock
gear ranges that supply a high torque in low range (20 to 400 RPM) and in high
range (400 to 2500 RPM). The electronic control panel that is mounted above the headstock provides a RPM LED display, ON-OFF power indicator light, speed control knob, emergency stop push button and spindle jogging push button. The electronic infinitely variable speed is controlled by an AC motor
inverter. A 1/4 HP electric pump provides the headstock with forced pressure lubrication.

BED and BASE:

The one (1) piece machine floor base is made of solid cast iron. The bed is made of Meehantie casting that is vibration stress relieved. The bed ways are induction hardened and precision ground. The base has a front mounted chip pan for easy removal of metal chips and debris. The 2V solid bed
design provides rigidity that assures accuracy and maximum stability.

STANDARD EQUIPMENT

  • 7.5HP Main Drive Motor & Inverter
  • Electrics: 230V/3PH/60HZ
  • Coolant System w/110V/1PH/60HZ Pump
  • Chuck Guard (Manual
  • Removable Front Chip Pan
  • Lockable Main Disconnect Switch
  • Halogen Work Light
  • Leveling Pads(Qty 6)
  • Operation Manual & Parts List
  • Tool Box & Tools

  • Steady Rest with Roller Jaws (6.0″ Capacity)
  • Follow Rest with Bronze Jaws (3.5″ Capacity)
  • Telescopic Taper Attachment
  • 4-Way Tool Post
  • Face Plate (12″ for D1-6)
  • Brake Pedal
  • Full Length Splash Guard
  • Dead Center (Qty 2)
  • Spindle Center Sleeve: MT6 X MT4 (Qty 1)

 

SPECIFICATIONS

RKL-1560V -Table
Download RKL1560V PDF Document

LeBlond RKL-1960V Lathe

LeBLOND 19″X60″ EVS Lathe Model: RKL-1960V

Press Release
PRWeb News Release

Get a bigger manual lathe with all the precision and quality that are hallmarks of the LeBlond name. The RKL-1960V lathe has a wider 19″ swing in diameter with a 60″ distance between centers.

RKL-1960Vplain

FEATURES

HEAVY DUTY SPINDLE:

The headstock spindle is machined from forged alloy steel. It is hardened, ground and dynamically balanced. The spindle has three (3) point high grade precision bearings support.

ELECTRONIC VARIABLE SPEED HEADSTOCK:

There are three (3) headstock gear ranges
that supply a high torque in low range (30 to 125 RPM), medium range (125 to
450 RPM) and in high range (450 to 2200 RPM). The electronic control panel that is
mounted above the headstock provides a RPM LED display, ON-OFF power indicator light, speed control knob, emergency stop push button and spindle jogging push button. The electronic infinitely variable speed is controlled by an AC motor inverter.

BED and BASE:

The one (1) piece machine floor base is made of solid cast iron. The bed is made of meehanite casting that is vibration stress relieved. The bed ways
are induction hardened and precision ground. The precision hand scraped bed has a removable gap. The 2V solid bed design provides rigidity that assures accuracy and maximum stability.

STANDARD EQUIPMENT

  • Main Drive Motor & Inverter 7.5HP
  • Electrics: 230V/3PH/60HZ
  • Coolant System w/110V/1PH/60HZ Pump
  • Chuck Guard (Manual)
  • Removable Front Chip Pan
  • Full Length Splash Guard
  • Lockable Main Disconnect Switch
  • Halogen Work Light
  • Operation Manual & Parts List
  • Tool Box & Tools

  • Steady Rest w/Roller Jaws
  • Follow Rest w/Bronze Jaws
  • Telescopic Taper Attachment
  • 4-Way Tool Post
  • Face Plate (12″)
  • Brake Pedal
  • Dead Centers (Qty 2)
  • Spindle Center Sleeve (Qty 1)
  • Thread Indicator
  • Leveling Pads (Qty 6)

 

SPECIFICATIONS

LeBlond-960V- Table
Download RKL1960V PDF Document