The wheelhead is designed so that it can be tilted easily to ± 15 degrees. It can be swiveled 360 degrees on the horizontal plane. Both of these features make it easy to set rake and relief angles.
Grinding Wheel Spindle Assembly

The K.O. Lee universal tool & cutter grinder spindle assembly is designed so that the spindle shaft is supported by two pairs of angular ball bearings; i.e. one pair at each end of the spindle support. The spindle is grease lubricated for life and no additional lubrication is required.

Universal Workhead

The workhead can be positioned on the table as desired by the operator and can be swiveled accurately at any horizontal and vertical angle. It has a taper hole in each end of the spindle; i.e. NT#50 / MT5.

Table

In order to machine various grinding requirements, the table can be easily controlled from fine to rapid feed range. The table feed mechanism is designed to be controlled by finger tip action. The spring cushioned table dogs are used for both positioning the table as well as absorbing table return traverse shock. The table ways are hardened, ground and anti-friction bearings are used. It swivels 120 degrees.

Tailstock

The right and left tailstocks can be easily positioned any place on the table. The right tailstock has a retractable center for easy mounting and is mounting of the workpiece.

Lubrication

The machine has a centralized lubrication system.

The wheelhead is designed so that it can be tilted easily to ± 15 degrees. It can be swiveled 360 degrees on the horizontal plane. Both of these features make it easy to set rake and relief angles.

Grinding Wheel Spindle Assembly

The K.O. Lee industrial surface grinder spindle assembly is designed so that the spindle shaft is supported by two pairs of angular ball bearings; i.e. one pair at each end of the spindle support. The spindle is grease lubricated for life and no additional lubrication isrequired.

Universal Workhead

The workhead can be positioned on the table as desired by the operator and can be swiveled accurately at any horizontal and vertical angle. It has a taper hole in each end of the spindle; i.e. NT#50 / MT5.

Table

In order to machine various grinding requirements, the table can be easily controlled from fine to rapid feed range. The table feed mechanism is designed to be controlled by finger tip action. The spring cushioned table dogs are used for both positioning the table as well as absorbing table return traverse shock. The table ways are hardened, ground and anti-friction bearings are used. It swivels 120 degrees.

Tailstock

The right and left tailstocks can be easily positioned any place on the table. The right tailstock has a retractable center for easy mounting and is mounting of the workpiece.

Lubrication

The machine has a centralized lubrication system.

The K.O. Lee surface grinder precision cartridge is greased and free of maintenance. Comprised of Class 4 super precision angular contact bearings suitable for heavy grinding. The spindle is directly coupled with a V-3 low vibration motor. This ensures spindle run out accuracy of less than 0.002mm (0.00008”).

Machine Construction

The main components of the machine, including the base column and saddle, are made of High Quality Meehanite cast iron which is stress relieved to insure rigid stability.

Slideways

Both longitudinal and cross slide ways are precisely hand-scraped and laminated with Turcite-B. This provides a smooth travel and even low wear.

Table Construction

The unique design of the longitudinal and cross slideway’s Full Support System maintains accuracy during table reversing and full length of travel.

Table Feeds

The longitudinal feed is manual or hydraulic powered and the cross feed manual or electric motor powered. Both movements have adjustable reversing capability and interlocks to prevent manual operations while in a power feed mode. (Note: The table will traverse in both an automatic and manual mode.)

Automatic Lubrication System

The auto lubrication system, which is standard, provides lubrication on all slideways and leadscrew. This insures a smooth travel and minimizes wear.

Control Panel

All push buttons and switches are conveniently located on the control panel for easy operation.

The K.O. Lee 1224A surface grinders precision cartridge is greased and free of maintenance. Comprised of Class 4 super precision angular contact bearings suitable for heavy grinding. The spindle is directly coupled with a V-3 low vibration motor. This ensures spindle run out accuracy of less than 0.002mm (0.00008”).

Machine Construction

The main components of the machine, including the base column and saddle, are made of High Quality Double Wall Meehanite cast iron which is stress relieved to insure rigid stability.

Slideways

Both longitudinal and cross slide ways are precisely hand-scraped and laminated with Turcite-B. This provides a smooth travel and even low wear.

Table Construction

The unique design of the longitudinal and cross slideway’s Full Support System maintains accuracy during table reversing and full length of travel.

Table Feeds

The longitudinal feed is manual or hydraulic powered and the cross feed manual or electric motor powered. Both movements have adjustable reversing capability and interlocks to prevent manual operations while in a power feed mode. (Note: The table will traverse in both an automatic and manual mode.)

Automatic Lubrication System

The auto lubrication system, which is standard, provides lubrication on all slideways and leadscrew. This insures a smooth travel and minimizes wear.

Control Panel

All push buttons and switches are conveniently located on the control panel for easy operation.

The K.O. Lee 1020A industrial surface grinders precision cartridge is greased and free of maintenance. Comprised of Class 4 super precision angular contact bearings suitable for heavy grinding. The spindle is directly coupled with motor. This ensures spindle run out accuracy of less than 0.002mm (0.00008”).

Machine Construction

The main components of the machine, including the base column and saddle, are made of High Quality Double Wall Meehanite cast iron which is stress relieved to insure rigid stability.

Slideways

Both longitudinal and cross slide ways are precisely hand-scraped and laminated with Turcite-B. This provides a smooth travel and even low wear.

Table Construction

The unique design of the longitudinal and cross slideway’s Full Support System maintains accuracy during table reversing and full length of travel.

Table Feeds

The longitudinal feed is manual or hydraulic powered and the cross feed manual or electric motor powered. Both movements have adjustable reversing capability and interlocks to prevent manual operations while in a power feed mode. (Note: The table will traverse in both an automatic and manual mode.)

Automatic Lubrication System

> The auto lubrication system, which is standard, provides lubrication on all slideways and leadscrew. This insures a smooth travel and minimizes wear.

Control Panel

All push buttons and switches are conveniently located on the control panel for easy operation.

The KOL-618 High Precision Surface Grinder has longitudinal and cross slide ways that are precision handground and then laminated with Turcite-B. This provides a smooth, even travel with low wear. A full support system maintains accuracy during table reversing and full length of travel. Main components include base, column and saddle. They are made of High Quality Meehanite cast iron stress relieved to insure rigid stability.

The features also include slip-ring hand wheel dials, a removable cartridge-type spindle with a pair of duplex Class 9 bearings and dynamically balanced V-3 motor starting at 1.5 HP. Increased HP packages available.