RKL1900G SERIES GEARED HEAD

HIGH SPEED PRECISION LATHE

 

 

 

  • 20″ SWING
  • 40″ OR 60″ BETWEEN  CENTERS
  • 12 TURNING SPEED SELECTIONS
  • 45 FEED SELECTIONS
  • 7.5 HP
  • 3 PHASE or SINGLE PHASE
  • CUSTOMIZED OPTION CONTENT

 

 

Request Quote

Press Release
PRWeb News Release

Reliability and performance with a legendary name in machine tools! Try the LeBlond RKL1900G series lathe with a 20″ swing in diameter and 40″ or 60″ distance between centers.

FEATURES

HEAVY DUTY SPINDLE:

The headstock spindle is machined from forged alloy steel. It is hardened, ground and dynamically balanced.  Large through hole with convenient D1-6 cam-lock mount.  Special attention was given to lubrication channels providing a constant bath of oil to the supporting high grade two precision tapered roller and one precision ball bearing for long life.

12 SPEED HEADSTOCK:

Wide selection of fixed speeds coupled with a powerful 7.5hp motor to conquer your turning needs.  The lathe comes standard with 12 speed selections providing high torque up all the way to 1800 RPM. An electronic control panel is conveniently mounted with ON-OFF power indicator light, emergency stop push button, coolant pump switch and spindle jogging push button.  Lubrication channels are designed to provide constant headstock gear and bearing lubrication.

Wide BED with one piece BASE:

One-piece machine floor base is made of solid cast iron. Wide bed design is made of Meehanite casting that is vibration stress relieved. Bed ways are induction hardened to HRC 50 and precision ground. Precision hand scraped bed is designed with a removable gap further expanding swing capabilities. The proven LeBlond 2V and flat solid bed structure provides rigidity that assures accuracy and maximum stability.  Standard large volume removable chip tray makes for easy chip clean out and disposal.

Request Quote

  • 7.5 hp Motor
  • Electrics: 480V/3PH/60HZ (other selections available)
  • Coolant System with Pump and Reservoir
  • Chuck Guard with Spindle Safety Interlock
  • Removable Front Chip Pan
  • Lockable Main Disconnect Switch
  • Halogen Work Light
  • Leveling Pads
  • Operation Manual & Parts List
  • Tool Box & Tools

  • Steady Rest with Roller Jaws
  • Follow Rest with Roller Jaws
  • Telescopic Taper Attachment
  • 4-Way Quick Turn Tool Post
  • Face Plate
  • Safety Red Spindle Brake Pedal
  • Full Length Splash Guard
  • Dead Center (Qty 2)
  • Spindle Center Sleeve: MT7 X MT5 (Qty 1)

Picture1

Request Quote

 –  RKL-1900G
CAPACITY Swing Over Bed 20″
Distance Between Centers 40″ / 60″
Swing Over Carriage 13.9″
Swing in Gap 27.5
Gap Length 13.2″
Cross Slide Travel 10.7″
Top Slide Travel 6.3″
Carriage Width 18.8″
Carriage Length 17.3″
Bed Width 12″
  –
HEADSTOCK Spindle Nose D1-6
Spindle Bore 3.149″
Spindle Taper MT 7
12 Speed Selections(RPM): 36 – 1800
  –
THREADS Inch Threads (45) 2 to 72 TPI
Metric Threads (39) 0.2 to 14 MM
Modular Threads (18) 0.3 to 3.5
Diametral Threads (21) 8 to 44
Lead Screw Diameter 1.25″
Lead Screw Pitch 4 TPI
FEEDS Longitudinal Feed 0.0015 to 0.04 IPR
Cross Feed 0.00075 to 0.02 IPR
Feed Selections 45
TAILSTOCK Quill Diameter 2.3″
Quill Travel 5.0″
Quill Inside Taper MT 4
ELECTRICS Spindle Motor HP 7.5 HP
Voltage 480V / 3PH/ 60Hz*
Coolant Motor 1/8 HP
WEIGHT Approximate Weight (lbs) 4500 / 4850
SIZE Base Footprint 22.3″ x 87″ / 107″
Recommended Floor Space W x L 67″ x 93″ / 112″
SHIPPING SKID Width x Height 46″ x 75″
Length 95″ / 114″

PHONE: (888) 532-5663  Parts: Press 1  Machine Sales: Press 2   Service: Press 3

FAX: Parts and Machine Sales: (513) 943-0101/Service: (810) 724-9400

Share on FacebookTweet about this on TwitterShare on LinkedInEmail this to someone

    No Twitter Messages